Video: 1997 – 2001 Honda CR250 – Shock Linkage Rebuild
How To Service The Shock Linkage On Your 1997 - 2001 Honda CR250
The Tools You Will Need Are:17mm Socket
17mm Wrench
19mm Socket
...
1997-2001 Honda CR250 – Shock Linkage Rebuild
How To Service The Shock Linkage On Your 1997 to 2001 Honda CR250 Start with your bike on a stand with the subframe and shock absorber removed. I removed the rear wheel for video purposes, but you do not need to. Linkage Removal: Remove the lower chain roller to make room for the frame side bolt.
How To Reverse Bleed The Brake Systems On Your Dirt Bike
How To Reverse Bleed, Fill Or Replace The Brake Fluid On Your Dirt Bike. Bleeding Tools And Supplies: Two large syringes Hose Zip Ties Handy Wire Towels Brake Cleaner 8mm Wrench. Prep your bike by wrapping the brake caliper and reservoir in a towel, and removing the reservoir cap. Attach your hose to your filling...
How To Repair A Cracked Crankcase Cover On Your Dirt Bike
I Put A Hole My Crankcase Cover Because I Crash A Lot. I've cracked a few crankcase covers over the years, but this is the first time I've managed to crack one from inside of the cover. Of course, I didn't notice the crack until after I got back to my truck, meaning I put...
Trail Tech Keeps Draining My Battery! – How To Fix That
My Trail Tech Voyager Keeps Killing My Battery!
It might be killing your battery, too, so here's how I fixed mine for $7.Tools:Wire Strippers...
2009-2010 Honda CRF450R – Front Fork Rebuild
How To Rebuild The Forks On Your 2009 to 2010 Honda CRF450r. The Tools You Need Are: 35mm Fork Cap Wrench, 49mm Fork Damper Wrench, 15mm Box Wrench, 17mm Socket, Torque Wrench, Waste Oil Bucket, Plastic Wrap, Vise, Pick, Flathead Screwdriver, Lots of Towels, Safety Glasses.
Video: 2009-2010 Honda CRF450r – Front Fork Rebuild
How To Rebuild The Forks On Your 2009 - 2010 Honda CRF450r.
The Tools You Need Are:35mm Fork Cap Wrench
49mm Fork Damper Wrench
...
Video: 2009-2010 Honda CRF450r – Rear Shock Rebuild
How To Rebuild The Rear Shock Absorber On Your 2009 - 2010 Honda CRF450R
The Tools You Will Need To Service Your Shock Are:Bladder...
2009-2010 Honda CRF450R – Rear Shock Rebuild
Place you shock upside down in your vice and loosen the spring adjuster lock nut. Back the spring adjustment nut out, and remove the spring seat assembly and spring. Completely back out the rebound, high-speed compression, and low-speed compression adjusters.
Video: 2014 KTM 300 XC-W – Enduro Engineering Clutch Slave Cylinder Guard
The slave cylinder is an exposed component, and replacing it will cost around $90, plus if it's damaged, I'm pretty much screwed, because I...
