Video: 1997-2001 Honda CR250 Steering Stem Bearing Service

How To Service The Steering Stem Bearings On Your 1997 – 2001 Honda CR250.

You will need three specialty tools for this service: a steering stem nut adjustment wrench, a long bearing press, and a metal pipe that matches the diameter of the inner bearing race but still fits over the steering stem.

You can pick up a wrench for around $13. You can make your bearing press out of grade 8 bolts and washers for about $15, and the pipe will cost between, $10 to $25, depending on the store.

Related: Video: 1997-1999 Honda CR250 – Rear Suspension – Swingarm Service

The Tools You Will Need Are:

  • Steering Stem Adjustment Wrench
  • Smackin’ Pipe
  • Bolt Press
  • Torque Wrench
  • Breaker Bar
  • 32mm Socket
  • 10mm Socket
  • Long Flat Screwdriver / Blind Bearing Puller
  • Chisel / Dremel
  • Gloves
  • Grease

The Parts You Will Need Are:

  • New ’97-’01 Honda CR250 Bearing Kit
  • Lithium EP Grease

You can get all the parts and tools you need through our partner links HERE!

Start with your bike on a stand with the front end completely stripped except for one fork.

See The Full Step-By-Step HERE

Fix Your Dirt Bike Logo

This site uses Akismet to reduce spam. Learn how your comment data is processed.