Home Videos Video: 1997-2001 Honda CR250 – Water Pump Service And Repair

Video: 1997-2001 Honda CR250 – Water Pump Service And Repair

0
Video: 1997-2001 Honda CR250 – Water Pump Service And Repair
1997 - 2001 Honda CR250 - Cooling System - Water Pump Service And Repair - Thumb

How To Service The Water Pump On Your 1997-2001 Honda CR250

Your water pump is located at the front of your crankcase on the right side. Right next to the oil level plug is a tiny opening. 

The other side of this opening sits between the impeller shaft oil and coolant seals. If you can see oil, coolant, or both coming out of that opening, your water pump is no longer sealed and needs to be repaired.

See The Full Walkthrough HERE.

Click here to open the specifications table in a new window.

You can change the gasket on your water pump without removing the right crankcase cover. But if you need to change the seals, bearing, or impeller, your right crankcase cover must be removed.

Related: Here’s how to remove and install the flywheel on you CR250 without the proper tools.

The Tools You Will Need Are:

  • 8mm socket
  • Socket Wrench
  • Inch-Pound Torque Wrench
  • Blind Bearing Puller
  • Socket For  Oil Seal
  • Socket For Water Seal
  • Flat Head Screwdriver
  • Lithium Grease
  • Scraper
  • Dremel
  • Parts Cleaner
  • Shop Towels
  • Safety Glasses
  • Mallet
  • Small Pick

Remember! You can buy all the parts and tools you need through our partner links.

Keep Your ’97-’01 CR250 Running Right!

Fix Your Dirt Bike Logo

This site uses Akismet to reduce spam. Learn how your comment data is processed.