This is how to replace the rear wheel bearings on your 1997 – 2001 Honda CR250.
Replacing the rear bearings on your dirt bike is a very simple job.
Get some new Factory Links bearings on Amazon!
You will need a beating retainer removal tool to access the bearings.
- 1997 – 1999 Use a 44mm bearing retainer (Get Yours On Amazon)
- 2000 – 2001 Use a 47mm bearing retainer (Get This One on Amazon Too)
The bearings are a press fit, so you will need fire and a hammer to remove them.
You Can Get All The Parts And Tools You Need At Amazon.com!
Related: While you’re here, check out this front wheel bearing service.
The only specialty tool you will need is the bearing retainer tool.
Make sure to check out the full guide HERE.