Video: 2009-2010 Honda CRF450r Steering Stem Bearing Rebuild


How To Service The Steering Stem Bearings On Your 2009-2010 Honda CRF450R

You will need a steering stem nut adjustment wrench, a long nut, and bolt bearing press, and a metal pipe that fits over the steering stem, but small enough to match the diameter of the inner bearing race.

The adjustment nut wrench will cost around $13. You can get your press parts and metal pipe from your local hardware store in exchange for money.

Full Walkthrough HERE

The Tools You Will Need Are:

  • Steering Stem Adjustment Wrench
  • Smackin’ Pipe
  • Bolt Press
  • Chisel / Dremel
  • 32mm Socket
  • 10mm Socket
  • Breaker Bar
  • Long Flat Screwdriver / Blind Bearing Puller
  • Torque Wrench
  • Gloves
  • Grease

Related: How to service the rear caliper on your 09-10 Honda CRF450r.

The Parts You Will Need Are:

  • New ’09-’10 Honda CRF450R Steering Stem Bearing Kit
  • Lithium EP Grease

You can get all the parts and tools you need through our partner links HERE!

Start with your bike on a stand with front end disassembled except for the forks.

Fix Your Dirt Bike Logo

This site uses Akismet to reduce spam. Learn how your comment data is processed.