Lectron Carb Review And First Ride - Lectron Self Adjusting Carburetor - Featured

Lectron Carb Self Adjusting Carburetor – Review And First Ride

The first ride with my new Lectron was in southwest Missouri over the 4th of July weekend, and guess what? It was hot and humid the whole time. But that did not affect my bike in the slightest. I'm 340lbs, so I run the red spring on my 2-stroke because, well, I need all the power I can get. With the Lectron carb, I felt a substantial increase in low-end grunt, I have never been able to tractor like this.
Improve Your Dirt Bike Riding With A DIY Balance Board - Featured

This D.I.Y. Balance Board Will Improve Your Dirt Bike Riding!

For the past few years, I've been using a 2x4 on a dumbbell for balance practice as part of my workout circuit. I went this route because an Indo board cost around $200 and f**k you! $200 for a piece of wood and a cylinder?
D.I.Y Leak Down Tester - Featured

D.I.Y. 2-Stroke Leak Down Tester – Tool Reviews

This Is My DIY 2-Stroke Leak Down Tester It may be ugly, but it only cost $25, and it gets the job done. I found all the parts I needed at my local hardware store except for the one way valve that I had to special order, and the exhaust plug I had to get
2014 KTM 300 XC-W - Enduro Engineering Clutch Slave Cylinder Guard - Featured

2014 KTM 300 XC-W – Enduro Engineering Clutch Slave Cylinder Guard

I kept seeing Clutch Slave Cylinder Guards in the "suggested product" section for a while, and I always thought, "why, it's already made of metal" until this happened.
2014 KTM 300 XC-W - Enduro Engineering Skid Plate Install And Review - Featured-20

2014 KTM 300 XC-W – Enduro Engineering Skid Plate Install & Review

Install And Review For Enduro Engineering Skid Plate On My 2014 KTM 300 XC-WI've been riding more aggressive lately, and I thought it was time to add some armor to my bike. This skid plate retails for around $110, and considering a new case costs $600, the price was right.

Video: Forget What Your Friends Say, You Need To Find The Right Handlebar Grips...

Finding the right Dirt Bike Grip for you and your Dirt Bike is extremely important. Having the correct grip for your hand will help you avoid blisters and even help reduce arm pump. If your dirt bike grips are wrong for you, test out as many grips as you can to find the one that works best for YOU.
Outlaw Racing Easy Pull Clutch System Featured Image

Accessory Review: Outlaw Racing Easy Pull Clutch System

The Outlaw Racing Easy Pull clutch system (OREP) looks like an easy - and more importantly, cheap - way to lighten the clutch on your dirt bike. Outlaw Racing claims a 30% decrease in clutch pull resistance with this system, so I put it to the test to see if these claims are accurate...
Android Endoscope header

Tool Review: Android Endoscope/Borescope Camera

This endoscope camera for android is awesome! I can't begin to guess how much time and money I've saved using this little camera to look inside engine and transmissions instead of tearing them apart. Everything is included, the camera, the adapter to capture video directly to...
DIY Dirt Bike Clutch Holder Tool Header

Super Biased Tool Review: Home Made Clutch Holding Tool For $2.95!

Need a clutch holder for your motorcycle clutch basket? Save a load of money with this easy DIY clutch holder tool! I paid $2.95 for all the parts for this home made clutch holding tool, granted, you may pay more or less depending on where you live, but no matter what it will be cheaper that a store bought clutch tool!
Maxima Castor 927 2-Stroke Oil Review_compressed

Maxima Castor 927 2-Stroke Oil Review

Castor 927 by Maxima Racing Oils is probably the best castor based 2-stroke oil on the market, at least that I have personally used. I'm not going to tell you that castor oil is the best 2-stroke oil for your dirt bike because that's simply not the case. Full synthetic 2-stroke oils will always make more power...