Home 1994 – 2001 Yamaha YZ125 – Exhaust Valve Governor – Removal – Inspection – Installation 6 - Test the bearing by placing your governor in the bore and giving it a good spin.

6 – Test the bearing by placing your governor in the bore and giving it a good spin.

1 - Your exhaust valve governor sits at the bottom front of your right crankcase

6 – Test the bearing by placing your governor in the bore and giving it a good spin.

5 – Clean the pushrod bore, and check for any burs, cracks, or obvious damage
7 – Apply threadlock, and torque the fork screws to 44 inch pounds