Place you shock upside down in your vice and loosen the spring adjuster lock nut. Back the spring adjustment nut out, and remove the spring seat assembly and spring. Completely back out the rebound, high-speed compression, and low-speed compression adjusters.
This is PART 3 of the step-by-step rebuild for your Showa KZ3P SA-1 rear shock.
This is PART 2 of the step-by-step rebuild for your Showa KZ3P SA-1 rear shock.
This is PART 1 of the Step-by-Step rear shock rebuild for a Showa KZ3P SA-1 found on your 1997 - 1999 Honda CR250. The steps in this rebuild will also work for a 2000 -2001 Honda CR250, but keep in mind that for the 2000 - 2001 model years, Honda switched to a larger diameter shock, so parts are not interchangeable.