1997-2001 Honda CR250 Steering Stem Bearing Service
How To Service The Steering Stem Bearings On Your 1997 - 2001 Honda CR250. You will need three specialty tools for this service: a steering stem nut adjustment wrench, a long bearing press, and a metal pipe that matches the diameter of the inner bearing race but still fits over the steering stem. You can pick up a wrench for around $13. You can make your bearing press out of grade 8 bolts and washers for about $15, and the pipe will cost between, $10 to $25, depending on the store.
1997-2001 Honda CR250 Fork Maintenance Part 1: Disassembly
This is PART 1 of the step-by-step rebuild for 1998-2001 Showa 47mm suspension forks. The 1997 forks and the 1998 forks are the same, except for the way the fork cap assembly is connected to the fork compression unit and tube. The ‘97 fork has a cap the screws onto the OUTSIDE of the compression unit (damper), and uses a set screw to keep the cap in place.
1997-2001 Honda CR250 Fork Maintenance Part 2: Inspection
This is PART 2 of the step-by-step rebuild for 1998-2001 Showa 47mm suspension forks
1997-2001 Honda CR250 Fork Maintenance Part 3: Assembly
This is PART 3 of the step-by-step rebuild for 1998-2001 Showa 47mm suspension forks. -
