1997-2001 Honda CR250 Rear Suspension Specifications

Rear Suspension Specifications For Your 1997-2001 Honda CR250 Dirt Bike.

1997 -2001 Honda CR250 - Rear Suspension Specifications FeaturedSpecifications Included:

  • General
  • Rear Shock Standard Settings
  • Torque Specs

If you need parts and tools make sure to buy them here!

Related: 1997 – 2001 Honda CR250 Rear Shock Rebuild

Rear Suspension General Specs

Part: Specification:
Rear Suspension Make & Type Showa Pro-Link
Rear Wheel Travel 12.5 in (318mm)
Shock Absorber Gas & Pressure Nitrogen @ 142 psi
Shock Arm Bearing Depths
– Swing Arm Bore 4.4 – 4.7 mm
– Shock Absorber Bore 2.0 – 2.2 mm
– Shock Link Bore
— 1997 – 1999 6.5 – 7.0 mm
— 2000 – 2001 6.0 – 6.5 mm
Shock Link Bearing Depths
– 1997 – Bearing In Frame 4.4 – 4.7 mm
– 1998 – 2001 – Bearing In Link 4.4 – 4.7 mm
Shock Spring Preload Length
– 1997 10.62 in (269.8 mm)
– 1998 10.54 in (267.7 mm)
– 1999 10.53 in (267.4 mm)
– 2000 10.02 in (254.6 mm)
– 2001 10.15 in (257.9 mm)

 

Standard Rear Shock Settings:

All settings are based on fully seated adjusters.

Low-Speed Compression (Clicks Out) High-Speed Compression (Turns Out) Rebound Damping (Clicks Out)
1997 8 – 11 2-3/4 – 3-1/4 9 – 12
1998 8 – 11 2-3/4 – 3-1/4 11 – 14
1999 8 – 11 2-3/4 – 3-1/4 11 – 13
2001 – 2002 7 2-1/4 – 2-3/4 8 – 11

 

Rear Suspension Torque Specifications:
N•n in.-lb. ft.-lb.
Drive Chain Guide Mounting Nut 12 106
Drive Chain Roller Bolt
– 1997 – 2000 22 16
– 2001 12 106
Shock Arm (Swing Arm Side) 79 56
Shock Link (Frame Side) 79 56
Shock Mounting Nuts 44 33
Shock Spring Lock Collar 88 65
Swing Arm Pivot Nut 88 65

 

Keep Your ’97-’01 CR250 Running Right!

Fix Your Dirt Bike Logo

This site uses Akismet to reduce spam. Learn how your comment data is processed.