Before you start stripping the swingarm, remove the swingarm pivot bolt. You may need to lay your bike on its side and beat the bolt out with a sledgehammer, and that’s easier to do with the rear wheel still on. Once you get the pivot bolt out, replace it just enough to keep the swingarm attached.
Rear Suspension Specifications For Your 1997-2001 Honda CR250 Dirt Bike. Specifications Included: General, Rear Shock Standard Settings, Torque Specs.
This is PART 3 of the step-by-step rebuild for your Showa KZ3P SA-1 rear shock.
This is PART 2 of the step-by-step rebuild for your Showa KZ3P SA-1 rear shock.
This is PART 1 of the Step-by-Step rear shock rebuild for a Showa KZ3P SA-1 found on your 1997 - 1999 Honda CR250. The steps in this rebuild will also work for a 2000 -2001 Honda CR250, but keep in mind that for the 2000 - 2001 model years, Honda switched to a larger diameter shock, so parts are not interchangeable.